Commercial Solar · West Bengal
Rooftop Solar for Rice Mills in Malda and Dakshin Dinajpur: Is It Worth It in 2026?
How rooftop solar can cut power bills for rice mills in Malda, Dakshin Dinajpur and other North Bengal towns: roof checks, WBSEDCL metering, steps and costs.

The short answer
Yes, for most rice mills with large daytime power use and a strong roof, rooftop solar is worth checking in 2026. Hullers, polishers, graders and dryers run mainly in daylight, when solar produces power. A similar rice mill in Punjab reports about 40% lower power bills [2]. Actual savings in Malda or Dakshin Dinajpur depend on your bill, roof and load.
Why are more businesses installing rooftop solar in 2026?
Rooftop solar is growing faster than ever in India. Mercom India reports that rooftop installations reached 4.7 GW in July–September 2026, up 122% from the same quarter last year, and rooftop made up a record 42% of all solar added in that quarter [1]. Mercom says electricity bill savings continue to drive commercial and industrial (C&I) buyers [1]. The same report also warns that domestic solar cell supply is tight and that module prices have risen because of demand-supply imbalance [1]. For a rice mill owner, this means two things. Solar is now a common, proven way for businesses to cut bills, and it is wise to plan early and lock a written quote, because equipment prices can move within a few months.
Why does solar suit a rice mill?
A rice mill uses a lot of electricity for motors: elevators, huskers or hullers, whiteners and polishers, colour sorters, graders and blowers. Most of this work happens during the day, which is exactly when solar panels produce power. Power used directly from your own panels does not need to be bought from WBSEDCL, so each unit used this way reduces your bill. Rice mills also tend to have large sheds and godowns with big roof areas, which is the space solar needs. One example: a rice export house in Moga, Punjab, runs a 1.6 MW rooftop system that generates about 6,000 units a day. It expects to save about ₹1.54 crore a year, roughly 40% of its earlier power bill, with a reported payback of about three years [2]. Punjab tariffs and sunlight differ from North Bengal, so treat this as an example, not a promise for your mill.
What should a rice mill check on its roof first?
Many mill roofs in Malda, Dakshin Dinajpur and other North Bengal towns are metal (GI or colour-coated) sheet roofs, and some older sheds still have asbestos sheets. Before any panel goes up, a proper survey should check four things. First, roof strength: the purlins and trusses must carry the added weight and wind load. Second, roof condition: rusted or fragile sheets should be repaired or replaced first, because removing panels later costs time and money. Third, shade: chimneys, boiler stacks, silos and water tanks can cast shadows that cut output. Fourth, dust: husk and bran dust settle on panels and reduce generation, so the design must allow safe walkways and a regular cleaning plan. A good installer will also check your earthing, lightning protection and the distance to your main LT panel or HT substation.
How does WBSEDCL connect a business rooftop solar system?
West Bengal's rooftop solar rules are set by the West Bengal Electricity Regulatory Commission (WBERC) in the Grid Interactive Rooftop Solar PV System for Prosumers Regulations, 2025, which came into effect on 31 July 2025 [3]. The rules describe three ways to connect: net metering (exported units are set off against imported units), net billing (imports billed at your normal tariff and exports paid at a feed-in rate set by WBERC) and gross metering (all solar output credited at the feed-in rate) [3]. The application fee is ₹1,000 for low and medium voltage consumers and ₹5,000 for high and extra-high voltage consumers [3]. Systems above 10 kW need a technical feasibility study by the DISCOM, which should reply within 20 days, and the total solar on a feeder or transformer cannot exceed its capacity [3]. Which method applies to your mill depends on your connection type and system size, so confirm it at the survey stage. Our guide on net metering vs net billing for businesses explains the difference in more detail.
How should a rice mill size its solar system and pay for it?
The right size comes from your last 12 months of electricity bills, your connected load and your working hours, not from roof area alone. If the mill runs seasonally, the design should account for months with low milling, because excess units may earn less than the units you save. Most mills size the system to match daytime use. Rice mills do not get PM Surya Ghar subsidy, which is only for homes. Common ways to pay are outright purchase, a business term loan from your bank, or a PPA or lease model where a third party owns the plant. Solar equipment may also give tax benefits through depreciation, so ask your chartered accountant how this applies to your firm. Always ask for a written proposal that shows expected yearly units, the equipment brands and warranties, and a clear payment schedule.
Why choose a local installer like Brijstar?
A rice mill system is a working industrial asset, so service after installation matters as much as the price. Brijstar Green Energy Pvt Ltd is a solar EPC company based in Siliguri that works for businesses across North Bengal, Sikkim and beyond. We do the site survey and structural check, design the system for your load, handle WBSEDCL liaison for metering, and carry out installation, commissioning and after-sales service. For commercial clients we offer leading module and inverter brands, including Tata Power Solar, and we also provide battery storage (BESS) where your mill needs backup for critical loads. If you run a rice mill or agro-processing unit in Malda, Balurghat, Gangarampur, Raiganj or nearby, book a free site survey with Brijstar — call or WhatsApp +91 99324 08999, or visit brijstar.com.
Common questions
Can a rice mill get PM Surya Ghar subsidy?
No. PM Surya Ghar subsidy is only for individual homes and eligible housing societies. Rice mills and other businesses do not get it.
How much can a rice mill save with rooftop solar?
It depends on your bill, roof size and working hours. One rice export house in Punjab expects about 40% lower power bills [2], but your mill's result needs a site survey.
Can solar panels go on an old asbestos or tin shed roof?
Only after a structural check. Weak or damaged sheets should be repaired or replaced before installation.
Does husk dust affect solar panels?
Yes. Dust on panels lowers output, so plan safe walkways and regular cleaning from day one.
What is the WBSEDCL application fee for a business rooftop system?
Under the WBERC 2025 rules, ₹1,000 for low and medium voltage consumers and ₹5,000 for high and extra-high voltage consumers [3].
Sources and checks
- [1] Mercom India – India's Solar Capacity Rises 21% YoY in 9M Despite Cell Shortages (12 Nov 2026)
- [2] Mercom India – Rice Exporter TLG Agro Traders Expands Rooftop Solar Capacity to 1.6 MW (15 Jun 2026)
- [3] SolarQuarter – West Bengal Issues New Rules to Boost Rooftop Solar for Prosumers from July 31, 2025
Confirm current utility and scheme rules before purchase.
Your next step
Check your business site